Bossong Medium/heavy-duty bi-component polyester styrene-free resin for use in different base materials as concrete, solid masonry and hollow bricks masonry.

According to data and features in the European Technical Approval (ETA) you have at your disposal one of the best chemical anchors in the European market with masonry approval ETAG 029 for fixing in solid and hollow masonry.
You can install it in wet masonry.
The product is homologated for being used with a wide range of threaded rods (from M8 to M12) and sleeves (GC 12x80 - GC 15x85 - GC 20x85).
Certified service temperatures are in the ranges -40°C/+40°C (T° max long period = 24°C) and -40°C/+50°C (T° max long period = 40°C).

ETA-15/0560 Option 7 from M8 to M16 for non-cracked concrete. The product is certified for fixing with variable anchorage depths. This means that the project engineer and the user have an high flexibility.
Maximum embedment depth up to 20 times nominal threaded rod diameter. Loads for installation in dry and wet concrete. Certified service temperatures are in the ranges: -40°C/+50°C (T° max long period = 40°C).

VOC according to the French Decree nr. 2011-321 and the Norm ISO 16000.

Due to the absence of styrene (no strong smell) the use is possible also in closed places.
Suitable for use on hollow materials using the special plastic sleeve.
Quick setting and curing times.
Thixotropic consistency.
The resin, due to its strong adhesion value and the ease with which it penetrates holes and hollow areas, permits secure fixing without expansion and so without stresses in the base material.
For applications in wet concrete or flooded hole and where very heavy load are required, our epoxy resin (BCR-EPOX and BCR-EPOXY21) or vinylester resin (BCR-VINIL and BCR V-PLUS) are recommended.
It does not need premixing, the resin and hardener are only mixed during extrusion in the special mixer.
It can also be used for repair and refilling.

© 2021 Fiera Milano SpA - P.IVA 13194800150
An error has occurred